RoboEarth Cloud Engine ready for use

For the past few years, a consortium of six European research institutes has been collaborating on a project known as RoboEarth. Essentially a “worldwide web for robots,” the idea is that it will allow robots to access a shared online database of each others’ software, thus allowing them to learn how to perform new tasks from one another. The first phase of the project, Rapyuta: The RoboEarth Cloud Engine, is now up and running.

Named after a fictional castle in the sky inhabited by robots, Rapyuta’s main purpose is to allow robots’ data-processing functions to be performed in the cloud. This means that the robots themselves won’t require as much onboard computational hardware, and will thus be lighter, less expensive and more robust.

Each robot using the service has its own secure cloud-based computing environment. Using a wireless connection, the robot uploads data to that environment, where it’s processed at a rate that’s reportedly much faster than would be possible using robot-based hardware. The results are then downloaded back to the robot, which acts upon them.

Additionally, the environments of different robots can be linked together, allowing them to work as a team. Plans call for each environment to also be linked to the RoboEarth knowledge repository, allowing robots to draw upon the system’s “collected wisdom” when necessary.

Rapyuta would be most useful for particularly complex tasks, such as mapping, navigation, and human voice command recognition. It’s been suggested that it would be particularly useful for mobile robots, that require a lot of computational power for navigation.

Comments

Nanotubes boost potential of salinity power as a renewable energy source

In November 2009, Norwegian state owned electricity company Statkraft opened the world’s first osmotic power plant prototype , which generates electricity from the difference in the salt concentration between river water and sea water. While osmotic power is a clean, renewable energy source, its commercial use has been limited due to the low generating capacities offered by current technology – the Statkraft plant, for example, has a capacity of about 4 kW. Now researchers have discovered a new way to harness osmotic power that they claim would enable a 1 m 2 (10.7 sq. ft.) membrane to have the same 4 kW capacity as the entire Statkraft plant. The global osmotic, or salinity gradient, power capacity, which is concentrated at the mouths of rivers, is estimated by Statkraft to be in the region of 1,600 to 1,700 TWh annually. Electricity can be generated through the osmotic phenomena that results when a reservoir of fresh water is brought into contact with a reservoir ...

NES robot mash-up competes in robo boxing tournament

In a move that brings back memories of the R.O.B. (Robotic Operating Buddy) that was available for the original Nintendo Entertainment System, Japanese hobbyist Izumi Ninagawa has simplified the controls of a modern fighting robot to work with a Famicom (8-bit NES) game pad – which has one of the most basic button configurations around. The NES-styled robot even competed in a robot boxing tournament earlier this year Ninagawa's XEMNES robot is based on a lightweight kit sold by De Agostini called ROBO-XERO , which weighs less than one kilogram (2.2 pounds) and is powered by 24 Futaba servo motors. By attaching a Bluetooth dongle to the robot with a special micro controller, Ninagawa was able to take advantage of various wireless controllers, including the Nintendo Wii remote. The remote was then hidden inside the shell of a Famicom, and attached to the Famicom controller using an adapter to complete the set-up. Despite the NES pad's limited number of buttons, variou...

New type of silicone exhibits both viscous and elastic properties

Looking for a more effective solution to the all-too-common wobbly table dilemma than a folded up bit of cardboard or piece of rubber under the leg, University of Virginia physicist Lou Bloomfield created a new type of silicone rubber called Vistik – it's malleable enough to take on any shape when pressed, but is still resilient enough to offer support, as it gradually starts to return to its original shape as the pressure is released. The material could have many applications ... beyond just steadying up wobbly tables. Vistik is a viscoelastic material, meaning that it exhibits both viscous and elastic properties. As a result, when compared to something such as conventional silicone rubber, there’s a considerable time lag in its response to continuous pressure. “It seems elastic in response to sudden forces or impacts, denting in proportion to the sudden, brief stress and then returning almost instantly to its earlier shape when that stress is removed,” Prof. Bloomfield ex...

ANBARASUASOKAN

Search This Blog